Store_and_forward_delay

In a network based on packet switching, transmission delay (or store-and-forward delay) is the amount of time required to push all of the packet\'s bits into the wire. In other words, this is the delay caused by the data-rate of the link.

Transmission delay is a function of the packet\'s length and the transmission delay and has nothing to do with the distance between the two nodes. This delay is proportional to the packet\'s length in bits,

It is given by the following formula:

$D\_T\; =\; N/R$

where

$D\_T$ is the transmission delay

N is the number of bits, and

R is the rate of transmission (say in bits per second)

Most packet switched networks use store-and-forward transmission at the input of the link. A switch using store-and-forward transmission will receive (save) the entire packet to the buffer and check it for CRC errors or other problems before sending the first bit of the packet into the outbound link. Thus store-and-forward packet switches introduce a store-and-forward delay at the input to each link along the packet\'s route.

References

• Computer Networking: A Top-Down Approach by Kurose and Ross

This article is licensed under the GNU Free Documentation License. It uses material from Wikipedia